Ventilation solutions for air conditioning and HVAC
Residential and small commercial HVAC air conditioning
- Code :
- A42-L2
- Designation :
- 2RRM15 192x40R
- Voltage :
- 230V (50/60Hz)
- Code :
- A47-L1
- Designation :
- RRMuG9 220x43R
- Voltage :
- 120V (50/60Hz)
- Code :
- X52-A1
- Designation :
- RRMG9 220x43R
- Voltage :
- 230V (50/60Hz)
- Code :
- B02-A0
- Designation :
- GDSuG9 146x188R
- Voltage :
- 120V (50/60Hz)
- Code :
- T37-F7
- Designation :
- GREF5 120x62R
- Voltage :
- 230V (50/60Hz)
- Code :
- A43-L3
- Designation :
- RRMG9 175x42R
- Voltage :
- 230V (50/60Hz)
- Code :
- A43-L4
- Designation :
- RRMuG9 175x42R
- Voltage :
- 230V (50/60Hz)
- Code :
- A43-L5
- Designation :
- RRMuG9 175x42R
- Voltage :
- 120V (50/60Hz)
- Code :
- T37-A6
- Designation :
- GREF5 120x62R
- Voltage :
- 230V (50/60Hz)
ECOFIT offers AC and EC ventilation solutions to optimize noise levels at the required flow rates and pressures, thereby preserving indoor air quality.
In homes, hotels, offices, and public buildings, noise levels are a sensitive issue when it comes to ensuring everyone's comfort. This applies to fan coil and air distribution terminal applications. A fan coil distributes heat or cool air depending on the ambient temperature. An air distribution terminal allows indoor air to be renewed.
Fans suitable for the HVAC sector are:
- Single inlet forward centrifugal fans: these fans are capable of withstanding the high pressures associated with transporting air through ductwork
- Double inlet forward centrifugal fans: these fans offer the same advantages as the previous ones, while providing a higher air flow rate because air enters on both sides of the impeller.
- Backward centrifugal fans: these fans also maintain high pressure and offer an even higher air flow rate than single and double inlet fans.
To facilitate implementation in your applications, the EC motorization allows you to manage “constant flow” and “constant pressure” curves, even at low flow rates. This feature is available without a pressure sensor on single and double inlet centrifugal fans. It requires the addition of a pressure sensor on backward centrifugal fans.
The fans shown on this page are our standard models. If you have a specific requirement, please do not hesitate to contact us. Our technical and sales teams will offer you a tailored solution.